Matte finishes have become increasingly important in industrial coatings, plastic coatings, metal coating, consumer electronics coatings and decorative surface applications. Compared with high-gloss or mirror-like coatings, matte coatings offer a softer visual appearance, reduced glare and fingerprint visibility, and a more refined surface texture.
As a professional specialty matte resin manufacturer, boya provides solvent-based self-matting and easy-matting resin solutions for formulators seeking reliable gloss control, efficient processing and durable coating performance. Our Matte Resin Series serves coating systems that require a high-quality matte appearance along with practical properties such as scratch resistance, chemical resistance and formulation flexibility.
Whether you are developing a matte topcoat for plastic, metal, wood or other industrial substrates, our matte resins can help you build coating systems with consistent appearance and adjustable performance.
What Is Matte Resin?
Matte resin is a functional specialty resin that creates a low-gloss or non-reflective coating surface in coating formulations. Depending on the resin design, it can contribute to gloss reduction, surface texture control, coating appearance and overall film performance.
Unlike a standard binder that primarily provides film formation, adhesion or hardness, a matte resin is designed to support the creation of a visually uniform matte surface. It may be used alone or together with other resins, additives, pigments, solvents and curing agents, depending on the coating system.
In solvent-based industrial coatings, formulators commonly consider matte resin for applications where they need to balance appearance and durability. Typical target properties may include:
- Low-gloss or adjustable-gloss appearance.
- Uniform matte surface texture.
- Good formulation compatibility.
- Suitable viscosity for coating production and application.
- Scratch-resistant and chemical-resistant coating performance.
- A stable, aesthetically appealing finish after drying or curing.
The actual gloss level and final coating properties depend on the complete formulation, including resin selection, pigment volume concentration, matting additives, solvents, film thickness, substrate preparation and curing conditions.
Our Matte Resin Series
Our Matte Resin Series includes two main product categories:
- Self-Matting Resin
- Easy-Matting Resin
Both categories target solvent-based coating formulations. They give formulators options for developing matte finishes according to different requirements for solids content, hydroxyl value, viscosity, solvent system and final coating performance.
As a matte resin manufacturer, we understand that one resin grade cannot meet every coating requirement. A plastic coating may require a different balance of appearance, scratch resistance and application viscosity from a metal decorative coating or a wood-finish system. For this reason, our product range provides multiple grades to support formulation selection and product development.
Self-Matting Resin
Self-matting resin helps coating formulators achieve a matte surface appearance through resin selection and formulation design. Formulators can use it in coating systems that require a stable and visually consistent matte finish. Self-matting resin helps coating formulators achieve a matte surface appearance through resin selection and formulation design. Formulators can use it in coating systems that require a stable and visually consistent matte finish.
Compared with relying only on external matting agents, self-matting resin can offer formulators another approach to gloss control. It may help simplify formulation development and support the production of matte coatings with a more integrated resin-based solution.
Our self-matting resin products come as milky white liquids in butyl acetate.
Self-Matting Resin Product Range
| Model | Solid Content* | OH Value | Viscosity** | Acid Value | Appearance | Solvent |
|---|---|---|---|---|---|---|
| A-8605 | 40 ± 2% | 70–80 mg KOH/g | 2,800–3,000 cps | <3 mg KOH/g | Milky white liquid | Butyl acetate |
| A-8609 | 42 ± 2% | 100–110 mg KOH/g | 3,800–4,000 cps | <6 mg KOH/g | Milky white liquid | Butyl acetate |
* Solid content: 120°C × 1 hour.
** Viscosity measured at 25°C.
Why Consider Self-Matting Resin?
Self-matting resin may be suitable when the coating-development objective includes:
- Developing a matte or low-gloss surface appearance.
- Reducing formulation dependence on separate matting additives.
- Achieving a more consistent visual finish.
- Building solvent-based matte topcoats.
- Selecting resin grades according to hydroxyl value and viscosity requirements.
- Balancing matte appearance with the functional requirements of industrial coatings.
For final product development, formulators should evaluate the selected resin grade within the complete coating system. Important variables include the crosslinking mechanism, curing conditions, solvent balance, coating thickness, pigment and filler selection, application method and substrate type.
Easy-Matting Resin
Easy-matting resin is developed for formulators who need a flexible approach to creating matte coating systems. These resins can be selected according to solids content, hydroxyl value, viscosity range and solvent compatibility, helping formulators tailor the coating system to a specific application.
The easy-matting resin range includes products with different solids levels and solvent systems, including xylene, butyl acetate/xylene and ethyl acetate. This makes the series suitable for product-development work where formulators must carefully control processing conditions, drying behaviour and formulation compatibility.
Easy-Matting Resin Product Range
| Model | Solid Content* | OH Value | Viscosity** | Acid Value | Appearance | Solvent |
|---|---|---|---|---|---|---|
| A-8615 | 95 ± 2% | 165–175 mg KOH/g | U–W Gardner | <6 mg KOH/g | Clear liquid | Xylene |
| A-8635 | 50 ± 2% | 175–185 mg KOH/g | D–H Gardner | <2 mg KOH/g | Clear liquid | Butyl acetate / Xylene |
| A-8655 | 50 ± 2% | 190–200 mg KOH/g | D–H Gardner | <6 mg KOH/g | Clear liquid | Butyl acetate / Xylene |
| A-8665 | 70 ± 2% | 180–190 mg KOH/g | Y–Z2 Gardner | <5 mg KOH/g | Clear liquid | Butyl acetate / Xylene |
| DA-1338 | 75 ± 2% | 58–68 mg KOH/g | C–H Gardner | <2 mg KOH/g | Clear liquid | Ethyl acetate |
* Solid content: 120°C × 1 hour.
** Gardner viscosity measured at 25°C.
Benefits of Easy-Matting Resin
The Easy-Matting Resin Series gives formulators more options when developing solvent-based matte coatings. Depending on the grade selected and the full coating formulation, possible advantages include:
- Flexible resin selection for different coating requirements.
- Adjustable gloss-control potential.
- Multiple solids-content options.
- Different hydroxyl-value ranges for coating-system design.
- Compatibility considerations for common solvent-based coating systems.
- Clear-liquid appearance for easier incorporation into transparent or lightly pigmented coating formulations.
- Potential use in matte topcoats, protective finishes and decorative coating systems.
A higher-solids resin may be considered when reducing solvent content or adjusting production viscosity is important. A different hydroxyl-value range may be selected when the coating system requires a particular crosslinking response or film-performance balance. Final selection should always be confirmed through laboratory testing.
Applications of Matte Coating Resin
You can evaluate matte resins for a broad range of solvent-based coating applications. The appropriate product grade depends on the substrate, film-build requirement, curing method, gloss target, durability standard and existing formulation system.
Potential applications include:
Plastic Coatings
Matte resin can be considered for plastic coating systems used on substrates such as ABS, PC, PET and other engineered plastics. Matte coatings are often selected when brands or manufacturers want a premium low-gloss look, reduced reflection or a surface that is less visually sensitive to fingerprints and minor handling marks.
For plastic coating applications, formulators should test the complete formulation for adhesion, flexibility, impact resistance, scratch resistance, chemical resistance and compatibility with the selected substrate.
Metal Coatings
Matte coating resin may be used in decorative or protective metal coating systems where a low-reflection, modern or premium finish is required. Depending on the coating technology, matte finishes can be used on metal components, hardware, consumer products, decorative panels and industrial parts.
For metal substrates, coating formulators should evaluate corrosion protection requirements, adhesion, film hardness, curing conditions and the performance of the complete primer/topcoat system.
Industrial Protective Coatings
Industrial equipment, decorative parts and manufactured products may require a finish that combines surface protection with a controlled matte visual appearance. Coating formulators can consider matte resin when they need to reduce gloss while maintaining the functional performance expected from the coating system.
How to Select the Right Matte Resin
Choosing the right matte resin requires more than selecting a low-gloss product. The resin requires evaluation within the intended formula and end-use conditions.
Key selection factors include:
| Selection Factor | Why It Matters |
|---|---|
| Target gloss level | Determines the required degree of matte appearance and formulation strategy |
| Substrate | Plastic, metal, wood and other substrates can require different adhesion and flexibility profiles |
| Coating system | Solvent-based acrylic, polyurethane, polyester and other systems may have different compatibility requirements |
| Hydroxyl value | Can affect crosslinking design and the balance of film properties |
| Solids content | Influences viscosity, solvent demand, VOC strategy and application behaviour |
| Solvent system | Must be compatible with the existing formulation and application process |
| Application method | Spray, dip, roll coat and other methods may require different rheology and drying characteristics |
| Final performance | Scratch resistance, chemical resistance, hardness, adhesion and appearance should be validated through testing |
For example, a coating formulator developing a matte topcoat for ABS consumer-electronics housings may prioritize adhesion, scratch resistance, chemical resistance and fingerprint appearance. A furniture-coating formulator may place more emphasis on feel, sanding performance, leveling and a natural low-gloss aesthetic. The same matte resin grade may not be the best choice for both applications.
Benefits of Working With a Matte Resin Manufacturer
Working directly with a matte resin manufacturer can help coating formulators and distributors obtain more relevant product guidance during resin selection and formulation development.
Our support can include:
- Product recommendations based on your coating system.
- Selection of self-matting or easy-matting resin grades.
- Technical-data support for solids content, hydroxyl value, viscosity and solvent system.
- Assistance with sample evaluation.
- Discussion of application requirements and target performance.
- Support for product development, qualification and commercial supply.
For customers developing new coating products, the most effective approach is typically to begin with a clearly defined performance target. This may include target gloss, substrate, coating process, curing method, resistance requirements and desired appearance. From there, formulators can select an appropriate matte resin grade for laboratory evaluation.
Request Matte Resin Samples and Technical Information
If you are developing solvent-based matte coatings and need a reliable matte resin manufacturer, our Self-Matting Resin and Easy-Matting Resin Series can provide a practical starting point for formulation development.
Contact us to request:
- Technical Data Sheets.
- Sample evaluation.
- Product-selection support.
- Formulation discussion.
- Information about self-matting resin and easy-matting resin grades.
- Custom matte resin solutions for your coating application.
Our technical team can help you identify a suitable matte coating resin based on your substrate, coating system, gloss target and required coating performance.




