A-8605 & A-8609 Scratch-Resistant PU Matte Resins for ABS, ABS+PC and PC Plastic Coatings

Manufacturers widely use matte finishes on plastic components in consumer electronics, automotive interiors, and other high-touch applications. In addition to delivering a refined, low-gloss appearance, these coatings must resist scratches, alcohol cleaning, and everyday handling.

A-8605 and A-8609 are modified hydroxy acrylic resins developed for matte, scratch-resistant polyurethane coating systems. Both products are designed for ABS, ABS+PC, and PC plastic substrates, and are suitable for 3C electronics and automotive applications.

Designed for Matte Plastic Coatings

A-8605 and A-8609 are intended for use in two-component (2K) coating systems. They can be formulated into single-layer matte color coatings or used in 2K clear topcoats, giving formulators flexibility across different coating structures.

Both resins come as translucent, milky-white liquids formulated with butyl acetate. Their modified hydroxy acrylic structure supports compatibility with polyurethane curing systems, while the matte finish helps create a soft, premium surface appearance on plastic parts.

Key Performance Features

•Excellent scratch resistance: Helps coated plastic parts maintain their appearance during handling, assembly, transport, and daily use.

•Outstanding alcohol resistance: Supports cleaning and disinfection requirements commonly encountered in electronics, automotive, and other high-contact applications.

•Suitable for common engineering plastics: Designed for ABS, ABS+PC, and PC substrates.

•Flexible 2K formulation options: Formulators can use these resins in single-layer color coatings or clear topcoat systems.

•Matte surface appearance: These resins deliver a refined, low-gloss finish for applications that demand a high-quality appearance.

These features make the products relevant for components such as electronic housings, cosmetic covers, automotive interior trim, control panels, and other plastic parts where both appearance and surface durability are important.

A-8605 and A-8609 Matte Resin: Product Comparison

Although A-8605 and A-8609 share the same product positioning, they have different viscosity, active content, and recommended dilution ratios. These differences allow formulators to select the grade that best matches their formulation solids, application viscosity, and spray equipment.

PropertyA-8605A-8609
Resin typeModified hydroxy acrylic resinModified hydroxy acrylic resin
Hydroxyl value7070
Viscosity2800±2003800±500
Gardner11
Active content40±3%42±3%
AppearanceTranslucent milky-white liquidTranslucent milky-white liquid
SolventButyl acetateButyl acetate
Recommended dilution ratio*A-8605 : 3390 60% : thinner = 10:2:8–12A-8609 : 3390 60% : thinner = 3:1:2–3

*The recommended ratios are starting-point references. The final formulation ratios require adjustment according to the selected curing agent, target viscosity, substrate, spray equipment, and desired coating performance.

A-8605 has a lower nominal viscosity and active content, while A-8609 offers a higher viscosity and active content. Because both products target similar substrates and applications, laboratory evaluation helps formulators determine which grade delivers the best balance of matte appearance, scratch resistance, alcohol resistance, flow, and application stability in a specific system.

Application Guidelines

For spray applications, formulators typically apply both A-8605 and A-8609 matte resins at a dry film thickness of 12–25 μm. The recommended baking condition is 70–80°C for 30–60 minutes.

As with all solventborne coating raw materials, proper ventilation, temperature control, and handling procedures are important during storage and application. The products require storage in tightly closed containers in a cool, well-ventilated area, away from heat and ignition sources. The stated shelf life is six months from the manufacturing date.

A-8605 and A-8609 are available in 25 kg and 180 kg packaging options.

Typical Applications

•3C electronics, including housings, covers, and decorative parts.

•Automotive interior and exterior plastic components.

•ABS, ABS+PC, and PC parts requiring scratch and alcohol resistance.

•Single-layer matte color coatings and 2K clear topcoat systems.

Request TDS and Samples

A-8605 and A-8609 provide formulators with two matte, scratch-resistant PU resin options for ABS, ABS+PC, and PC plastic coatings. Their combination of scratch resistance, alcohol resistance, and 2K formulation flexibility makes them suitable for demanding 3C electronics and automotive applications.

Contact our technical team to request the full TDS, SDS, or a sample of A-8605 or A-8609. Our team can also discuss formulation guidance based on your product, substrate, gloss target, application process, and performance requirements.

Share your love